Nautel GV20, Руководство по установке, Страница: 35 / 66

GV20/GV15 INSTALLATION MANUAL INSTALLING PROGRAM INPUTS
VERSION 5.0 2021-03-01 PAGE 2.7.3
Figure 2.7.2: Routing Program Input Cables
** PROGRAM INPUT WIRING ENTRY HOLE HAS A REMOVEABLE PLATE WITH A PRE-CUT
1/4-INCH DIA HOLE. USE A CHASSIS PUNCH TOOL (e.g., GREENLEE) TO CREATE DESIRED
HOLE SIZE IN THE PLATE. REMOVE PLATE (FOUR M4 SCREWS) BEFORE PUNCHING.
REMOVE THE PLATE TO ACCESS A 2.5-INCH HOLE, IF NECESSARY.
PROGRAM INPUT
ENTRY **
CHANNEL
ENTRY POINT
CHANNEL
EXIT POINT
TYRAP ANCHOR
HOLES PROVIDED
FOR ROUTING
WIRE OUTSIDE OF
CHANNEL
CONNECT TO REAR PANEL
OF EXCITER A AND
OPTIONAL EXCITER B. See
Pre-Installation Manual for
details)
EXCITER A
EXCITER B
(OPTIONAL)
REAR VIEW (PANELS REMOVED)
SHOWN WITH DUAL EXCITERS