Nautel Exporter Plus, Техническое руководство по эксплуатации, Страница: 80 / 186

Exporter Plus Technical Instruction Manual Operating
Page 8-10 Issue 1.0 2020-05-05
Figure 8.8: Serial Number Screen
To change the serial number of the Exporter Plus, press the checkmark (accept) button to
enter the screen shown in Figure 8.11 on page 8-11 .
Use the right and left buttons to highlight the desired character in the new serial number, then
use the up and down buttons to change the value of the highlighted character. Use this field to
identify the Exporter Plus (serial number, etc.). Press the accept or cancel button to enter the
Save/Cancel screen (see Figure 8.4 on page 8-5 ). Save or cancel as desired.
Figure 8.9: Serial Number Editing Screen
Changing operating mode
When you select
Operating Mode
from the
SYSTEM
menu (see Figure 8.10 ) you can configure
the operating mode of the Exporter Plus. For AM systems, hybrid MA1 and all-digital MA3
modes are supported. For FM systems, MP1 through MP3 (for hybrid operation) and MP5 and
MP6 for all-digital operation are supported.
Figure 8.10: Operating Mode Screen
To change the operating mode of the Exporter Plus, press the checkmark (accept) button to
enter the screen shown in Figure 8.11 .