Nautel Exporter Plus, Техническое руководство по эксплуатации, Страница: 109 / 186

Exporter Plus Technical Instruction Manual Operating
Issue 1.0 2020-05-05 Page 8-39
Figure 8.83: Set Ramp Rate Screen
To set the ramp rate, press the checkmark (accept) button to enter the editing screen shown in
Figure 8.84 .
Figure 8.84: Set Ramp Rate Editing Screen
Use the up and down buttons to increase or decrease the value of the ramp rate. The ramp rate
is defined as a multiple of the diversity delay. See “Overview” on page 1-1 for additional
information.
Press the accept or cancel button to enter the Save/Cancel screen (see Figure 8.4 on page 8-5 ).
Save or cancel as desired.
Setting delay increment
The Exporter Plus has remote inputs that, when asserted, allow for an increment or decrement
in the preset diversity delay period. When you select
Set Increment
from the
DIVERSITY DELAY
menu (see Figure 8.85 ) you can set this increment value.
Each assertion of the remote increment input will increase the diversity delay by the increment
setting. Each asserion of the remote decrement input will decrease the diversity delay by the
increment setting.