Nautel Exporter Plus, Техническое руководство по эксплуатации, Страница: 108 / 186

Exporter Plus Technical Instruction Manual Operating
Page 8-38 Issue 1.0 2020-05-05
Setting delay period
When you select
Set Delay
from the
DIVERSITY DELAY
menu (see Figure 8.81 ) you can set the
diversity delay for the analog audio.
Figure 8.81: Set Delay Screen
To set the diversity delay, press the checkmark (accept) button to enter the editing screen
shown in Figure 8.82 .
Figure 8.82: Set Delay Editing Screen
Use the right and left buttons to highlight the desired digit in the new delay value, then use the
up and down buttons to increase or decrease the value of the highlighted digit. You can set the
diversity delay between 0 and 20 seconds. Press the accept or cancel button to enter the Save/
Cancel screen (see Figure 8.4 on page 8-5 ). Save or cancel as desired.
Setting ramp rate
When you select
Set Ramp Rate
from the
DIVERSITY DELAY
menu (see Figure 8.83 ) you can set
the length of time diversity delay transitions selected in Setting delay ramp up/down - see
page 8-37 .
Note: For AM systems, the diversity delay should not require adjustment, however it
may be required if the audio input timing is not balanced.