natus Nicolet Synergy EDX, Руководство пользователя

Страница: 78 / 94

Nicolet EDX
5-6 January 30, 2020
Placing markers
You can have the software place markers automatically or place them manually.
Placing markers automatically
To have the software place markers automatically on the waves at the selected
locations when the number of steps have been completed:
All relevant measurements and calculations are displayed in the tables in the
Results Tables area.
Placing markers manually
To place markers manually on the data:
1. Click on Results > Marker Setup .
2. Check the Enable checkboxes for the desired Markers.
3. Ensure the
Auto checkboxes for the markers you want
placed automatically are also checked.
1. Click the Marker Bar On/Off button.
1. Click on View > Panels > Marker Panel .
1. From the Markers panel, use either of the following methods:
a. Click on the Marker Number you want to place,
position the marker icon over the wave feature you want
to mark and click the mouse button. Repeat for each
marker you want to place.
b. Click on the Fast Mark button, position the marker icon
over the first feature you want to mark as “ 1 ” and click
the mouse button. Move the marker icon over the next
feature and click the mouse button. Repeat until all of the
desired markers have been placed. Click on the
Fast
Mark button again to turn the function off.