natus Nicolet EEGwireless32, Руководство пользователя, Страница: 81 / 138

April 27, 2015
5-19
Using the Nicolet system to setup and acquire EEG
Changing the
sampling rate 1. Select Settings > Amplifier .
2. Select your sampling frequency from the "Common Sampling Rate" menu (Figure
1). You can select specific sampling frequencies between 128 Hz to 12000 Hz.
Figure 1.
NOTE:
If you select a sampling rate over 4096 Hz while in the wireless mode, you
will be prompted to turn the wireless module off. If you choose not to turn it off, your
sampling rate will not be changed. If you choose to turn it off, in order to re-enable
the wireless module, you must power cycle the amplifier.