natus Grass S88X, Руководство пользователя и обслуживания

Страница: 40 / 64

7-40
Chapter 7
Operation
b
asic
o
pEratinG
m
oDEs
s
iNgle
P
ulses
Single Pulses (S1 or S2, with or without delay) initiated from the S88X
SINGLE button.
1. Turn the POWER switch on .
2. Select S1 (or S2 ) FUNCTION .
3. Use TIMING thumbwheel to select SINGLE PULSE (SP) .
4. If delay is required, select the DELAY pushbutton. The display indicates
the delay values in seconds.
5. Use left and right arrow keys to select the digit to be changed.
6. Use the TIMING thumbwheel to select a value between 0 and 9 .
7. Select the TIMING DURATION pushbutton. The display indicates the
duration value in seconds.
8. Use the left and right arrow keys to select the digit to be changed.
9. Use the TIMING thumbwheel to select a value between 0 and 9 .
10. Set the OUTPUT AMPLITUDE in volts using the OUTPUT AMPLITUDE
thumbwheel and the left and right arrow keys.
11. Depress the OUTPUT ON/OFF button.
12. Depress the SINGLE button to initiate the output single stimulus.
13. To synchronize other devices to the stimulus, connect either the S1
(
or
S2
)
SYNC OUT (no delay), or the S1 DEL
(
or S2 DEL
),
if delay is required, to
the other device synchronous input.
Note:
Single pulses with or without delay can be initiated from an
external trigger source with the
S1 or S2
FUNCTION
set to the
SYNC TO S1 DELAY
,
or SYNC TO S2 DELAY
.
Connect the trigger to either
the S1 DEL
(
S1
)
or the S2 DEL (S2) SYNC IN .