natus ErgoJust ICU, Инструкция по установке и эксплуатации, Страница: 13 / 92

Introduction
August 22, 2017
1-5
Impact Hazard! Moving parts can crush and cut.
Minimize lift tension before removing mounted equipment. Failure to heed this warning may
result in serious personal injury or property damage.
1. Lower work surface to lowest position.
2. Turn the adjustment nut at top of the riser counterclockwise until it stops (may require
40-60 turns to minimize lift tension).
3. After removing or adding equipment, adjust lift tension to compensate for weight of new
load.
Do not load cart below minimum or above maximum weight capacities. Do not mount a
display larger than the recommended size. Failure to comply with this warning may result in
cart instability leading to equipment damage or personal injury.
NOTE: If the lift tension is not adjusted to the weight of the monitor, the monitor or work
surface may shift by itself. Adjust the lift tension so that the monitor and work surface
remains stationary.
Tipping Hazard! Failure to comply with the following warnings may result in cart instability
leading to equipment damage or personal injury.
• Do not allow children to climb on cart.
• Do not route electric cords or equipment cables within reach of children.
• Lock all casters when cart is stationary.
• Do not move cart with display in the highest position.
• Do not move cart over cords or uneven, dirty, wet or sloping surfaces.
• Do not move cart by pushing on the display.
Stored energy hazard! Failure to heed the following warnings may result in serious Personal
Injury and damage both to the cart and equipment.
•
A primary mechanism within the cart is under tension and can be hazardous to people
exposed to it under certain conditions.
•
Do not open the cart tower or base.
•
Do not attempt to service the cart.
•
Do not remove safety guards or labels designed to protect or inform of possible hazards.
•
Only Natus approved installers may service or otherwise modify the cart.