https://www.naturewater.eu
Item 51110
Page 5
09 2021
-1
1. Use a 3-way connector to install the ball valve. Then connect the tap to the 3-way connector
(Fig. 10, 11). If using a pressure reducer, connect this as well (Fig. 12).
2. Place the tap depending on the desired orientation. The tap is connected to the outlet connec-
tion piece of the activated carbon afterfilter with the help of a plastic hose.
3. Connection of plastic hose with connecting piece:
•
Trim a plastic hose after measurement.
•
Insert the plastic hose into the hexagon head nut.
•
Introduce the white hose plug into the endpiece of the white plastic hose, press the hose
plug into the hose with your hand or a tool.
•
Slide the plastic hose into the connection pieces.
•
Screw the hexagon head nut.
4. Connection of plastic hose with quick couplings
•
Trim a plastic hose after measurement.
•
Slide the plastic hose deeply into the connection piece.
5. Disconnection of plastic hoses from quick couplings
•
Remove the small piece.
•
Press the round piece until it touches the main part of the quick coupling.
•
Remove the plastic hose.
Important Note:
Reproduction and any commercial use (of parts) of this operating manual, requires a written permission
of WilTec Wildanger Technik GmbH.
