https://www.naturewater.eu
Article 50811, 50812, 51784, 51785, 62789–62791
Page 3
08 2022
-1
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to
always take some basic safety precautions when using this product. Please read this operating manual
carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
General remarks
A booster pump is used when the normal water pressure feeding a reverse-osmosis system requires
increase. The efficiency of the booster pump depends on the intake pressure of the supplied water. For
correct operation, a typical reverse-osmosis system requires a water pressure of a minimum of 3.5
bar
(50
psi). In case the water pressure is below 3.5
bar (50
psi), the system produces a smaller quantity of
water with a lower quality.
Note!
Our booster pumps have a pressure regulation screw. The pump is tested in the factory and
set to ideal values. We wish to advise you not to modify these values, which could affect the output of
the pump.
Figure 1
