9
Technical specification
Power supply 230 V AC 50 Hz, L+N+PE
Front fuse
10 A max RCD (Fi) 30 mA.
Input
5-50 Watt
Appliance class
I.
Weight
Max 20 kg
Light source
LED strip, cool white / warm white
Light source life
up to 50 thousand hours.
Ballast
1 – 2 x ballast for 12 V DC SELF
IP Code IP 44
The mirror consists of aluminium frame comprising various profiles according to the type, of a size 20-50 x 20-50 mm. Mirror of various shapes and
sizes (width and height: 400 – 1500 mm, thickness of glass: 5 mm) is stuck on the frame. There is an access to the power supply from the back
side of the mirror through the metal cover with stainless steel screws. Variants of the product are based on size, shape of the mirror (rectangular,
square, oval, round with sharp edges, round edges, etc.), aluminium frame and different LED lighting (warm white / cool white). Electric connection
remains the same. The LED strips are glued to the luminaire with a thermally conductive adhesive. It is not necessary to change the light source,
due to its long life. For inspection purposes or at the end of the LED luminaire‘s lifetime, the light source can be disconnected by removing the
metal cover and then detached from the light source holder. End users cannot change the light sources due to permanent damage to the product.
Light source in this type of mirror is irreplaceable, after the lifespan is over, the whole mirror needs to be exchanged.
Electric diagram
Products of article numbers:
ZIL8060LEDC
Products of article numbers:
ZIL8060LEDSEC
(with a switch for on/off and changing the colours warm/cool white):
7.
Instructions for assembly
The light is determined to be attached to wall or another suitable inner surface.
The light can be installed in the area around the basin or around the shower or bath but it cannot be placed in zones 0+1+2 (see the pictures
in the paragraph Instructions for Assembly – installation on wall). Connecting to electricity network requires a qualified electrician and must be
done according to the regulation 50 Sb/78. Connect the supply cable (at the back side of the mirror) to the existing mains in the wiring box placed
preferably behind the mirror. If there is already a supply cable in the wall, it is possible to connect it with the mirror cable on the back side of the
mirror by the terminal box (article number ZP 01 – not included in the package). It is highly recommended that the installation is accomplished by
two persons.
For the assembly use a pair of wall plugs and screws which are included in the package. These are determined for brickwork with a standard
plaster thickness. For other types of wall use appropriate attachment components.
EN Instructions for assembly
L
N
LED
+
-
12V
230V
SELV
PE
Zdroj
W
0
5
-
5
L
N
+
-
12V
230V
SELV
PE
LED
Zdroj
5-50W
L
N
LED
+
-
12V
230V
SELV
PE
Zdroj
W
0
5
-
5
L
N
+
-
12V
230V
SELV
PE
LED
Zdroj
5-50W
power supply
power supply
