Page
of 1
4
After
mounting and connecting your
Inverter according to the instructions in
this manual, use the ON/OFF/REMOTE
switch to choose the Inverter’s operating
mode.
ON: When you set the switch to the ON
(I)
position, the Inverter provides
power to
connected equipment by
converting DC
power from your vehicle’s
battery. The
green LED will illuminate to
indicate it is
working.
OFF: Set the switch to the OFF (O)
position to shut down the Inverter
completely. Doing this will prevent it from
drawing power from your vehicle’s
battery.
Also set the switch to the OFF
position to
reset the Inverter if it has shut
down due
to low battery, overload or
other critical
condition.
REMOTE: When you set the switch to
the
REMOTE (II) position, the Inverter
provides AC power to connected
equipment by converting DC power from
your vehicle’s battery.The green LED will
illuminate to indicate it is working.You
can then power the inverter ON/OFF
from a remote location via the included
remote.This remote switch can be
mounted in the vehicle or a permanent
mount application. The green LED on the
remote will illuminate to indicate the
inverter is in the ON operating mode.
Connect the Inverter (see CONNECT-
ING INVERTER CABLES).
Switch the Inverter’s ON/OFF switch to
the ON (I) position. If you are using the
included remote panel, set the switch to
the REMOTE (II) position and press the
ON button on the remote panel.
The green LED indicator will illuminate
on the unit or remote panel (If installed),
1.
2.
3.
OPERATING INSTRUCTIONS
Содержание 37002
Страница 6: ...Page of 14 OUTPUT POWER INDICATE LIGHT ...
