Page 3 of 4
Operating Instructions
Mounting Instructions
Remove all cable ties and uncoil all of the cables before using the AC to DC powerconverter
Plug the converter into a 110/120V AC standard wall outlet
Note - The use of an extension cord is not recommended. If you require the use of anextension cord
only use a heavy duty 12 gauge cord less than 50 feet(30.5 meters)long.
The Red “Power On” LED will light directly when you plug converter into a 110V/120VAC outlet.
Insert the 12V DC accessory plug from the device being operated into the converter’ssocket(Maxi-
mum draw 5.8 amps or 70 watts). The 12V socket is wired so the centerconductor is po) and
the outer sleeve is negative(-).Note – Always confirm that the 12V plug on your chosen device is
wired the same way.
Turn on the 12V device being operated
To disconnect, reverse the procedure.
Note – Make sure to let the converter cool completely before storing.
The converter can be permanently mounted to any flat surface.
Rotate outwards the two metal brackets on the underside of the converter to expose the screw holes.
Utilize these two brackets for mounting (screws not included).
Specification
Property
Output
Input
12V DC / 5.8A
110-120V AC / 1.5A
Parts List
Conveter
Manual
1
1
Parts Description
Quantity
