Natural Bed Company
168-170 Devonshire Street, Sheffield, S3 7SG. T: 0114 272 1984
[email protected] www.naturalbedcompany.co.uk
Oregon Wooden Bed Assembly Instructions
Superking Size (1.80x2.00m)
View the Oregon on our website
Items included in bed flat pack are:
1 x headboard panel
1 x headboard rail (the headboard rail has more holes than the footboard rail)
1 x footboard rail
2 x side rails
1 x centre rail (not included if you have ordered a single bed)
1 x set of sprung beech slats
1 x set of double sprung beech slats with sliders
1 x set of plastic end caps (2 per slat)
Fixings:
4x threaded bolts
4x half-moon washers
4x nuts
1x spanner
8x wooden dowels
4x dome-headed bolts
1x 5mm hexagon key
1.
Screw the four threaded bolts into the side rails (See images below)
2.
Insert the wooden dowels into the headboard and footboard rails, tap these
in securely. (See images below)
3.
Bring the sections together, then secure using the half-moon washer and the
nut with the spanner provided (see images below). NB: the images below are
of the underside of the bed frame. You can tighten the bolts as shown by
