Native Instruments TRAKTOR AUDIO 10, Руководство пользователя

Страница: 33 / 76

32 – TRAKTOR AUDIO 10 – Manual
• Input Sens :
•
Select
Phono
for when connecting a
turntable
to the port (no matter if digital mixing
with timecode vinyl or analog mixing with records; both need phono amplification).
• Select Line for when connecting a CD deck to the port (or other line level equipment
such as a synthesizer, an MP3 player, a tapedeck, etc.).
Each port A through D may be used by one of the following devices: a turntable with ana -
log records, a turntable with timecode vinyl, a CD deck, a CD with a timecode disc, or any
other line device.
! %
By default, the soundcard is set to Phono with activated Direct Thru mode on ports A and B
for mixing analog signal from turntables, and Line with activated Thru mode on ports C an
D for mixing analog signal from CD decks.
Temporary and Default Settings (Current and Startup)
6.5 The Channel Setup with the
Current
settings tab selected.
The Channel Setup page holds two tabs for configuring the ports A through D on your TRAK -
TOR AUDIO 10: the Current settings and the Startup settings tab:
• On initial start-up, the Current settings reflect the settings from the Startup settings tab
(which holds the default settings). You can temporarily change these settings and they
remain changed until the device becomes unplugged from the power source.
! %
Unplugging the USB cable does not affect the Current settings.
• The Startup settings tab holds the port settings that the soundcard defaults to when
the device is initially plugged in with DC power. To apply changes here, you first have
to click on the lock symbol in the
Click the lock to make changes dialog box. Confirm your
changes by clicking the Save button.