KORE 2 – 179
Label
Function
Range
Unit
Mix
Controls the balance between the dry, unprocessed signal
(at the left) and the wet, processed signal (at the right).
0..100
%
Pre-Delay Time
Sets the time by which the incoming signal is delayed before
it is fed into the main reverb effect.
0..200
ms
Pre-Delay LR Offset
Sets the pre-delayed signal’s stereo position. Negative values decrease the left
channel delay time (as a percentage of the main delay time) while increasing the
right channel time. Positive values create the opposite effect.
-100 ...
+100
%
Reverberation Size
Controls the size of the simulated reverb room, i.e., the reverb decay time.
1..100
Reverberation Diffusion
Sets the amount of diffusion applied to the reverb signal. With lower values, the
reverb sound becomes more echo-like.
0..100
%
Reverberation Early/
Late
Controls the balance between the early reflections and the main reverb signal.
0..100
%
Low Decay
High Decay
Sets the decay time of the low/high frequency reverb signal bands. A high value
results in a longer reverb time of the respective frequency band.
0..100
%
Low EQ
High EQ
Sets the amount of cut or boost applied to the low/high frequency reverb signal
bands with a shelving equalizer.
-20..+20
dB