Native Instruments Guitar Rig Kontrol, Справочник по аппаратуре, Страница: 38 / 49

GUITAR RIG KONTROL Hardware Reference – 38
6.3 Using Additional Footswitches and Pedals
The RIG KONTROL features two jacks for connecting external footswitches and pedals with a
¼” patch cable. Once connected and set up, they can be assigned just like MIDI controllers in
GUITAR RIG 4
. Refer to the Getting Started Guide and the Application Reference to see how.
Under P
references
on the o
Ptions
page of GUITAR RIG 4, the following settings are available:
►
To calibrate an external pedal, click on the Reset button next to “RIG KONTROL Ext
Pedals Calibration.”
►
The two lines “RIG KONTROL Ext Pedal 1/2 Mode” allow to configure each both
inputs to match your external footswitch or pedal. Consult the manufacturer’s product
specifications to find out if it is a tip or ring active pedal, or respectively, if it is an
opening or a closing switch. If problems occur, try out the other available modes.
►
The “External Switch Mode” determines the behavior of external footswitches. Either
they are “on” while pressed (Toggle) or they switch between “on” and “off” each time
they are pressed (Switch).