Native Instruments Guitar Rig Kontrol, Справочник по аппаратуре, Страница: 30 / 49

GUITAR RIG KONTROL Hardware Reference – 30
The audio interface allows to be configured by the following parameters:
►
s
amPle
r
ate
: Choose a sample rate that is compatible with your music application and
suited to your computing power. Per default, the sample rate is set to 44100 Hz
(CD-Quality). Higher sample rates may improve sound quality, but cause a higher CPU
load as well.
►
l
atency
: Use the Latency slider to set the buffer size of the audio interface, measured
in samples. The buffer size has two effects: The higher it is set, the lower is the
probability of dropouts during real-time audio processing. On the other hand, the size
of the buffer directly affects the overall latency of your system. The time between the
moment you hit a note and the moment you hear the processed sound will be longer
if the buffer size is increased.
It is recommended that you start with the default buffer size and continue with the
subsequent steps of the installation. Once you are finished, you should load a clean
preset and revisit the Audio and MIDI Settings to figure out the best latency setting for your
system. This is done by gradually reducing the buffer size: Drag the latency slider to the
left while playing something. Once you begin to hear crackles or dropouts, carefully drag
the latency slider to the right until you reach the point where no crackles or dropouts occur.