7
Preparation Before Operation
■
Setting the air purifying filters
Open the front grille.
•
Hold the grille by the tabs on the two sides and lift it
until it stops with a click. (about 60°)
Set the air purifying filters.
•
Attach an air purifying filter to each air filter.
•
You may stick a colour sample label at a convenient
place on the indoor unit so that you can know when
they need replacement by comparing the colours. (See
page 11 “Care and cleaning – Replacing air purifying
filters”)
Set the air filters in their original
positions and close the front grille.
•
Operation without air filters may result in troubles as
dust will accumulate inside the indoor unit.
Pull out the air
filters.
•
Push upwards the tab
at the center of each
air filter, then pull it
down.
1
2
3
4
■
Setting the clock
Press
CLOCK
.
AM
is displayed.
AM
l
l
l
l
l
l
Press
to set the clock to
the present time.
blinks.
•
Holding down (
) or (
) button
rapidly increases or decreases the time display.
PM
l
l
l
l
l
l
PM
Press
CLOCK
.
blinks
.
(Now the clock is set.)
1
2
3
■
Turn the breaker ON
•
Turning ON the breaker opens the flap, then closes it again.
(This is a normal procedure.)
Indoor unit
℃
℃
Tips for saving energy
•
Be careful not to cool the room too much.
Keeping the temperature setting at a moderate level helps
save energy.
For cooling: 26°C ~ 28°C
•
Cover windows with a blind or a curtain.
Blocking sunlight and air from outdoors increases the
cooling effect.
•
Clogged air filters cause inefficient operation and waste
energy. Cleaning lamp tells you when the air filters need
cleaning. Clean them once in about every two weeks.
Please note
•
The air conditioner always consumes 15 ~ 35 watts of electricity
even while it is not operating.
•
If you are not going to use the air conditioner for a long period, for
example in spring or autumn, turn the breaker OFF.
•
Use the air conditioner in the following conditions.
Mode
COOL
DRY
Operating conditions
Outdoor temperature : 10 to 46°C
Indoor temperature : 18 to 32°C
Indoor humidity
: 80% max.
Outdoor temperature : 21 to 46°C
Indoor temperature : 18 to 32°C
Indoor humidity
: 80% max.
If operation is continued out of this
range:
•
A safety device may work to
stop the operation.
(In multi system, it may work to
stop the operation of the outdoor
unit only.)
•
Condensation may occur on the
indoor unit and drip.
•
A safety device may work to
stop the operation.
•
Condensation may occur on the
indoor unit and drip.
• Operation outside this humidity or temperature range may cause
a safety device to disable the system.
Recommended temperature setting
NOTE
