9
運転
タイマ
おそうじ
Adjusting the
horizontal blade (flap)
You can adjust the air flow direction to increase your
comfort.
•
Be careful when adjusting the louvre. Inside the air
outlet, a fan is rotating at a high speed.
Adjusting the louvre
ATTENTION
Adjusting the Air Flow Direction
Hold the knob and move the louvre.
(You will find a knob on the left-end and the right-end blades.)
Notes on flap angles
•
When [SWING] is selected, the flap
swinging range depends on the
operation mode. (See the figure.)
•
When [SWING] is selected in heating
operation, the flap and the diffuser
swing up and down in combination.
•
The diffuser is kept open in DRY or
COOL mode.
Press
SWING
.
•
Every time the button is pressed, “
” appears or
disappears.
.......
The flap automatically
swings up and down.
No display
.......
To stop the flap at an
angle you like, press
SWING
.
DRY· COOL
•
Unless [SWING] is selected, you should set the flap at
a near-horizontal angle and at a near-horizontal angle
in COOL or DRY mode to obtain the best performance.
•
In DRY mode, if the flap is fixed at a upward position,
the flap automatically moves in about 60 minutes to
prevent condensation on it.
NOTE
•
Always use a remote controller to adjust the flap angle.
If you attempt to move it forcibly with hand when it is
swinging, the mechanism may be broken.
ATTENTION
SWING
•
Always use a remote controller to adjust the louver
angle. If you attempt to move it forcibly with hand when it
is swinging, the mechanism may be broken.
ATTENTION
Press .
•
Every time the button is pressed, “ ” appears or
disappears.
.......
The louver automatically
swings right and left.
No display
.......
To stop the louver at an
angle you like, press
.
SWING
<CS-MK180>
<CS-MK90/120>
