![background image](http://html2.mh-extra.com/html/national/3402/3402_instruction-manual_3359767008.webp)
Safety
EXTENSION CORDS
Grounded tools require a three wire extension cord. Double insulated tools can use either a two or three wire extension cord. As the distance
from the supply outlet increases, you must use a heavier gauge extension cord. Using extension cords with inadequately sized wire causes a
serious drop in voltage, resulting in loss of power and possible tool damage.
The smaller the gauge number of the wire, the greater the capacity of the cord. For example, a 14 gauge cord can carry a higher current than
a 16 gauge cord. When using more than one extension cord to make up the total length, be sure each cord contains at least the minimum
wire size required. If you are using one extension cord for more than one tool, add the nameplate amperes and use the sum to determine the
required minimum wire size.
GUIDELINES FOR USING EXTENSION CORDS
•
If you are using an extension cord outdoors, make sure it is marked with the suffi x “W-A” (“W” in Canada) to indicate that it is acceptable
for outdoor use.
•
Be sure your extension cord is properly wired and in good electrical condition. Always replace a damaged extension cord or have it re-
paired by a qualifi ed person before using it.
•
Protect your extension cords from sharp objects, excessive heat and damp or wet areas.
•
Keep away from water. Do not use if wet.
•
Inspect thoroughly before each use. DO NOT USE IF DAMAGED.
•
Make sure equipment is OFF before connecting cord outlet.
•
FULLY INSERT plug into outlet.
•
Do not remove, bend or modify any metal prongs or pins of cord.
•
Do not use excessive force to make connections.
•
Do not connect a three prong plug to a two-hole cord.
•
Avoid overheating. Uncoil cord and do not cover it with any material.
•
Do not walk on cord.
•
Do not drive, drag or place objects over cord.
GENERAL SAFETY
1. Cables damaged through crushing or splitting can be dangerous if used and should be replaced immediately. Risk of personal injury.
2. Do not connect the machine to an unearthed socket. Risk of personal injury.
3. Make sure the assembly area is fi rm, so the dust extractor does not tip over. Risk of personal and material injury.
4. Risk of pinching when handling the toggle fastener.
5. Do not vacuum hot or smoldering particles, as the machine can catch fi re. If a fi re should break out, remove the plug from the socket and
extinguish the fi re using the available fi re-fi ghting equipment. An appropriate pre-separator should be connected between the suction pipe
and the dust extractor when sucking up soot, ash and hot materials.
6. The machine must not be used in environments where explosives may be present. Serious risk of explosion.
7. Do not look into the suction pipe or suction hose if blocked. Serious risk of eye injury.
8. Do not direct the suction hose towards body parts when the machine is running. Avoid placing your hand or other parts of the body against
the suction inlet if the suction hose is not fi tted. Risk of personal injury.
Fax: 763-535-8255
8
WARNING:
ELECTRICAL CORDS CAN BE HAZARDOUS. MISUSE CAN RESULT IN FIRE OR DEATH BY ELECTRICAL SHOCK. READ
CAREFULLY AND FOLLOW ALL DIRECTIONS.
Содержание 3402
Страница 1: ...HEAVY DUTY DUST COLLECTOR INSTRUCTION MANUAL Caution Read Manual Before Operating Machine 043014 Rev A...
Страница 2: ......
Страница 20: ...Parts List and Diagrams Fax 763 535 8255 info nationalequipment com 20...
Страница 26: ......