1. Raise needle to highest point.
2. Raise the feed roller.
3. Thread by following the letters indicated in the illustration (See Figure 1).
A. Upper Thread Guide
B. Enter Tension Discs
C. Exit Tension Discs
D. Take up Spring
E. Take up Lever
F. Lower Thread Guides
G. Needle Block
H. Needle (See Figure 2).
NOTE:
Assure thread is bottomed in the tension disc (B & C). This is extremely important.
Page 8
THREADING INSTRUCTIONS
Needle as Viewed
from Front
EYE
CORRECT
SCARF
Thread
Needle from
Left to Right
Figure 1
Figure 2
