Page 23
FOLDER ADJUSTMENTS
For uneven folds where the bottom stitch misses the tape there are 2 possible solutions.
1. Place a straight edge in the front of the folder. Adjust the folder guide (part #126-1521) so that it just
touches the straight edge and is at a slight angle away from the edge at the front. Trial and error
maybe necessary with slightly more movement to the left (See Figure 1).
2. Loosen the folder to bracket screws. By trial and error movements of slight increments, raise the end
where the binding tape comes out while keeping the screw at the opposite end at the bottom of the
slot (See Figure 3).
Slight angle to
straight edge.
Loosen
Raise
Lower
REAR VIEW OF FOLDER
Figure 1
Figure 3
Figure 2
