National Toilet Partitions HD-8122, Руководство по установке

Страница: 14 / 24

www.natpart.com 866-820-3579 14
6 INSTALL THE PILASTERS
6.1 Prepare the pilaster floor fasteners. For leveling device follow
steps 5A.1 through 5A.3. For shoe & heel follow step 5B.1.
6.2 Place the pilaster onto the leveling device (or heel) and level the
top of the pilaster with the pilaster at the wall.
6.3 On the back of the pilaster mark the center of the panel
according to shop drawings.
(See fig 6.2)
6.4 Mark the pilaster where the brackets will be located at 18” and
64” off the floor for shoe and heel, 17” and 63” for leveling
device.
6.5 Place the pilaster-to-panel brackets onto the pilaster where the
marks are made. Mark the mounting holes.
(see fig 6.2)
6.6 Drill ¼” holes through the pilaster and secure the pilaster-to-
panel brackets with ½" bolts
(FA-900)
and 5/8" barrels
(FA-951).
6.7 Place the shoe onto the pilaster and place the pilaster onto the
leveling device (or heel). Slide the panel into the bracket.
6.8 Secure the pilaster.
6.8.1 For leveling devices place a 3/8" washer and nut onto the threaded
rods and tighten to secure the pilaster.
6.8.2 For shoe & heel drill level top of pilaster with pilaster at wall, drill a ¼”
hole through the shoe, heel and the pilaster. Secure with ½" bolts
(FA-
900)
and 5/8" barrels
(FA-951).
6.9 Level the pilaster front and drill through the top panel bracket
hole. Secure the panel with a ½" bolt
(FA-900)
and ½" barrel.
(FA-
950).
Drill and secure the remaining panel bracket hole(s).
6.10 Repeat steps 6.2 through 6.9 for each pilaster.
6.11 For leveling devices secure the shoes. Drill a ¼” hole through
the pilaster. Secure the shoes with ½" bolts
(FA-900)
and 5/8"
barrels.
(FA-951)