National Semiconductor LSE039R2, Руководство пользователя

Страница: 7 / 21

7
2 Installation
2.1 Uninstall previous SW versions
First, if present, remove any old SW versions installed:
1. Remove the CF Card and run \StartMenu\SppLoader.exe until it says "Serial Ports are disabled”.
2. Uninstall any previous installation of the Bluetooth Pocket PC SW by using ActiveSync from a
connected PC.
2.2 Install new SW
1. Run the setup.exe and follow the instructions
2. IMPORTANT! Reset the device TWICE.
2.3 Insert the CF Card
1. Insert the CF card.
2. Verify the installation by starting a Bluetooth application, e.g. \StartMenu\FileTransfer.exe to verify
that status goes into idle within a couple of second.
3. Installation completed!