National Semiconductor ADC08100, Инструкция по эксплуатации

Страница: 13 / 16

APPENDIX
Summary Tables of Test Points and Connectors
Test Points on the ADC08100 Evaluation Board
TP 1 Power Down Input. Pull high to power down the ADC08100
TP 2 ADC Top Reference Voltage
TP 3 Ground
TP 4 ADC Bottom Reference Voltage
TP 5 Ground
TP 6 Ground
TP 7 Signal Input test point
TP 8 Ground
TP 9 +3V Supply
P1 Connector - Power Supply Connections
J1-1 +5V Positive Power Supply
J1-2 GND Power Supply Ground
J1-3 +5V Logic and Digital Interface Board Supply
J1-4 -5.2V Negative Power Supply
J1 Connector - Number of Memory Chips Used (hard wired)
Connect 1-2 One Memory Chip (Default)
Connect 2-3 Two Memory Chips
J2 and JP3 - Not Used
J4 Connector - ADC Clock selection jumper settings
Connect 1-2 Divide frequency of Y1 by 2 (Default)
Connect 2-3 Use frequency of Y1
J5Connector - Divide Enable
Connect 1-2 Two Memory Chips
Connect 2-3 One Memory Chip (Default)
13 http://www.national.com