17
Operating
your
Vehicle
Maintenance
Important tip
Make sure the vehicle has come to a completely stop
before switching between
“forward” and “reverse”.
Stop
Vehicle will automatically stop after the accelerator is
released.
Safety devices
AUTO POWER OFF. If the motor is overloaded for
any reason, including improper usage, an electrical
circuit breaker will automatically cut off the power,
then resume after the parts have cooled!
Clean with a dry, soft cloth only. Do not wash
with water or corrosive agents.
Store vehicle in a dry area when not in use,
since moisture could cause the metal
components and electrical parts to corrode.
Remember to charge the battery monthly while
the vehicle is not in regular use.
Check and tighten all screws and coverings
regularly.
Check all plastic parts for cracks. Replace as
necessary.
Removing the high speed lock-out screws will allow
the vehicle to be driven at the higher speed (5 mph,
(8 kmh) maximum) as well as the the lower speed
(2.5 mph, (4 kmh) maximum).
However, prior to removing the screw, be sure your
child can safely steer and operate the vehicle and
knows the rules for safe driving.
Cautious
:
High speed lock - out screws removing
must be done by an adult!
Advanced use - disconnecting
the high speed lock-out
Beginner use - low speed
Forward
Push the shifter in downward position and press the
accelerator slowly.
Push the shifter in upward position and press the
accelerator slowly.
Vehicle has been pre-set to operate at low speed
(2.5 mph, (4 kmh) maximum). Once your child
has mastered safe driving skills and understands
the Safe Driving Rules, the high speed lock – out
screw can be removed to allow the vehicle to
operate at both high and low speeds.
Reverse
Reverse
Forward
High speed
Accelerator
Remove lock - out
screws for high speed
Meijer.com
