![background image](http://html1.mh-extra.com/html/national-instruments/vrts/vrts_getting-started-manual_3668279003.webp)
4.
If you are using a PXIe-5841, install the software described in the
PXIe-5841 Getting
Started Guide
.
Installing the Hardware
The Vehicle Radar Test System with 4 GHz Bandwidth is a modular system with a variety of
configuration options. This guide uses two example configurations to illustrate the hardware
installation process. Module placement and cabling varies depending on the modules that
comprise your system.
Installing the VRTS with 4 GHz Bandwidth Modules
Notice
To prevent damage to the VRTS with 4 GHz Bandwidth caused by ESD or
contamination, handle the module using the edges or the metal bracket.
1.
Ensure the AC power source is connected to the chassis before installing the module.
2.
Power off the chassis.
3.
Inspect the slot pins on the chassis backplane for any bends or damage prior to
installation. Do not install a module if the backplane is damaged.
4.
Identify supported slots in the chassis.
•
Place the controller in the first slot.
•
Place the PXIe-5551 module(s) in the slots to the right of the controller.
•
If you are using a PXIe-5841, place it in the slots to the right of the PXIe-5551
module(s).
Note
PXIe-5551 and PXIe-5841 modules can be placed in PXI Express
peripheral slots, PXI Express hybrid peripheral slots, or PXI Express system
timing slots.
5.
Touch any metal part of the chassis to discharge static electricity.
6.
Ensure that the ejector handle is in the downward (unlatched) position.
7.
Place the module edges into the module guides at the top and bottom of the chassis. Slide
the module into the slot until it is fully inserted.
8.
Latch the module in place by pulling up on the ejector handle.
9.
Tighten the screws on the front panel of the module.
10. Repeat steps 5 through 9 for all PXIe modules in your system.
11. Cover all empty slots using EMC filler panels or fill using slot blockers to maximize
cooling air flow, depending on your application.
VRTS with 4 GHz Bandwidth Getting Started Guide
|
© National Instruments
|
3