2
|
ni.com
|
NI VirtualBench Calibration Procedure
FGEN Test Equipment.................................................................................................... 47
FGEN Test Conditions.................................................................................................... 47
FGEN Initial Setup ......................................................................................................... 48
FGEN Verification.......................................................................................................... 48
Verifying the FGEN Offset..................................................................................... 48
Verifying the FGEN Gain....................................................................................... 49
FGEN Adjustment .......................................................................................................... 50
FGEN EEPROM Update ................................................................................................ 52
FGEN Re-Verification.................................................................................................... 52
DC Power Supply Test Equipment................................................................................. 53
DC Power Supply Test Conditions................................................................................. 53
DC Power Supply Initial Setup....................................................................................... 54
DC Power Supply Verification ....................................................................................... 54
Verifying Voltage Programming and Measurement Accuracy .............................. 55
Verifying Current Programming and Measurement Accuracy............................... 60
Adjusting Voltage Programming and Measurement Accuracy .............................. 64
Adjusting Current Programming and Measurement Accuracy............................... 68
Software and Firmware
Calibrating the NI VirtualBench
requires the installation of NI VirtualBench application
development support and NI LabVIEW 2013 or later on the Windows calibration system. You
can download the software and driver from
.
Table 1 lists the earliest required firmware support for VirtualBench calibration. You can update
the firmware through the VirtualBench application.
Table 1.
VirtualBench Calibration Firmware Support
VirtualBench
Earliest Firmware Support
VB-8012
Version 1.1.2
VB-8034
Version 15.1
VB-8054
Version 16.1