Figure 8.
NI USB-TC01 Software Open Thermocouple Message
Note
During an open thermocouple condition, some invalid values may be
returned before the open thermocouple is reported.
Cold-Junction Temperature Measurement
Accuracy
Heat from other nearby heat sources can cause errors in thermocouple measurements by
heating up the terminals so that they are at a different temperature than the cold-junction
compensation (CJC) sensor used to measure the cold junction.
Minimizing Thermal Gradients
Thermocouple wire can be a significant source of thermal gradients if it conducts heat or cold
directly to terminal junctions. To minimize these errors, use the following guidelines:
•
Use small-gauge thermocouple wire. Smaller wire transfers less heat to or from the
measuring junction.
•
Avoid running thermocouple wires near hot or cold objects.
•
If you connect any extension wires to thermocouple wires, use wires made of the same
conductive material.
8
|
ni.com
|
NI USB-TC01 User Guide
