National Instruments USB-7856, Начало работы

Страница: 5 / 9

Figure 1.
Kit Contents for the NI USB-7856R
3
6
2
5
1
4
1. NI USB-7856R Module
2. USB Cable
3. Ferrite Bead
4. NI-RIO Media
5. Power Supply
6. Getting Started Guide
Installing Software on the Host Computer
Before using the NI USB-7856R, you must install the following application software
and device drivers on the host computer.
1. Install the driver software using either the media included in your kit or by
downloading the latest version from ni.com/downloads.
2. Follow the instructions in the installation prompts.
1. Windows users may see access and security messages during
installation. Accept the prompts to complete the installation.
3. When the installer completes, a dialog box asks if you want to restart, shut
down, or restart later. Select
Restart
.
Installing the Hardware
© National Instruments
5
USB-7856 Getting Started