National Instruments USB-7856, Начало работы

Страница: 4 / 9

Caution
To ensure the specified EMC performance, you must install the
included snap-on ferrite bead onto the DC power cord of the power supply
as described in this document.
Notice
To ensure the specified EMC performance, operate this product
only with shielded cables and accessories.
Unpacking the Kit
Notice
To prevent electrostatic discharge (ESD) from damaging the
device, ground yourself using a grounding strap or by holding a grounded
object, such as your computer chassis.
1. Touch the antistatic package to a metal part of the computer chassis.
2. Remove the device from the package and inspect the device for loose
components or any other sign of damage.
Notice
Never touch the exposed pins of connectors.
Note
Do not install a device if it appears damaged in any way.
3. Unpack any other items and documentation from the kit.
Store the device in the antistatic package when the device is not in use.
Verifying the Kit Contents
Verify the following components are in your kit.
ni.com
4
USB-7856 Getting Started