![background image](http://html1.mh-extra.com/html/national-instruments/usb-6210/usb-6210_user-manual_3656406024.webp)
Chapter 1
Getting Started
©
National Instruments Corporation
1-7
Panel Mounting
(USB-621
x
Screw Terminal/Mass Termination Devices)
To mo
u
nt the USB-621
x
to a board or panel, complete the following steps while referring to
Fig
u
Figure 1-5.
Mounting the USB-621
x
on a Panel
Note
Do
not
apply the r
u
bber feet to the USB-621
x
when panel mo
u
nting the device.
Note
Apply strain relief, as described in the
section,
before
panel
mo
u
nting the USB-621
x
.
1.
Download and print the panel mo
u
nting template PDF attached in the
KnowledgeBase doc
u
ment,
USB-621x Panel Mounting Template
.
Go to
ni.com/info
and enter the info code
ex3x98
to locate the
KnowledgeBase.
2.
Using the template, mark the bottom point and top point on the panel.
(USB-621
x
Screw Terminal Devices)
The points will be 171.45 mm
(6.75 in.) from each other.
(USB-621
x
Mass Termination Devices)
The points will be 182.56 mm
(7.188 in.) from each other.