![background image](http://html.mh-extra.com/html/national-instruments/tpc-2230/tpc-2230_user-manual_710228004.webp)
4
|
ni.com
|
TPC-2230 User Manual
Figure 1 shows the I/O port arrangement.
Figure 1.
I/O Port Arrangement
For more TPC-2230 specifications, refer to the
Specifications
section.
System Setup
This section includes setup information for the TPC-2230.
Important Safety Information
Before setting up the TPC-2230, read these safety instructions carefully.
Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use
liquid or spray detergents for cleaning.
For plug-in equipment, the power outlet socket must be located near the equipment and must be
easily accessible.
Keep this equipment away from excessive humidity.
Place this equipment on a reliable surface during installation. Dropping it or letting it fall may
cause damage.
The openings on the enclosure are for air convection and protect the equipment from
overheating.
Do not cover the openings.
Make sure the power source voltage is correct before connecting the equipment to the power
outlet.
Position the power cord so that it cannot be stepped on. Do not place anything over the power
cord.
All cautions and warnings on the equipment should be noted.
If the equipment is not used for a long time, disconnect it from the power source to avoid damage
by transient overvoltage.
1
Power Connector
2
LAN B
3
LAN A
4
USB 2.0 (Bottom) and USB 3.0 (Top)
5
COM2 (RS232/422/485)
6
COM1 (RS232)
2
3
4
5
6
1