©
National Instruments Corporation
3-1
TPC-2006 User Manual
3
System Configuration
This chapter explains how to configure the TPC-2006.
Display Settings
Use the display settings to control the backlight brightness and screen
saver, which automatically turns off the screen when the TPC-2006 is not
in use for a designated time period.
Follow these steps to set the display properties:
1.
Select
Start»Settings»Control Panel»Display
to access the
Display
Properties
window.
2.
To set the time to elapse before the backlight turns off, select the
Backlight
tab, click the
Automatically turn off backlight while on
external power
checkbox and select the time from the drop-down
menu.
3.
To set the LCD brightness, click the
Advanced
button to access the
Advanced Backlight Options
window. Move the slider or click
+
or
–
to adjust the LCD brightness and contrast. Click
OK
.
Touchscreen Calibration
Follow these steps to calibrate the touchscreen:
1.
Select
Start»Settings»Control Panel»Stylus
to access the
Stylus
Properties
window.
There are two tabs in the
Stylus Properties
window:
Double-Tap
and
Calibration
. Use Double-Tap to record the time period between two
taps when double-tapping in Windows CE. Use Calibration to calibrate
the touchscreen.
2.
Click the
Calibration
tab and click
Recalibrate
to calibrate the
touchscreen. A cross appears on the screen in the following locations:
center, upper left, lower left, lower right, and upper right. Use the
stylus to tap the center of the cross until it moves to next location.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
