DIN160 Cable Installation Instructions
2
ni.com
Getting Started with the DIN160 Cable
Complete the following steps to connect the cable to the NI PXI-2510 and your application. Refer
to Figures 2 through 4 for illustrations of the cable, and refer to Figures 5 and 6 for illustrations of the
connectors.
1.
Connect the DIN160 connector to the NI PXI-2510 connector on the switch module as shown in
Figure 1.
Figure 1.
Connecting the DIN160 Connector to the NI PXI-2510
2.
Tighten the thumbscrews on the cable.
1
Thumbscrews
2
DIN160 Connector
3
NI PXI-2510 Connector
2
1
3
