30
|
ni.com
|
160-Pin Cable Installation Instructions
Specifications
Maximum voltage .............................................150 V, CAT I
Maximum current per pin .................................2 A
Caution
Do
not
connect to mains supply circuits (e.g., wall outlets) of 115 or
230 VAC. Refer to the
Read Me First: Safety and Electromagnetic Compatibility
document for more information about Measurement Categories.
Weight
SH160DIN-4XDB50F-2A........................1837.1 g (64.8 oz)
SH160DIN-160DIN-2A............................1564.9 g (55. 1 oz)
SH160DIN-BARE WIRE-2A...................1451.5 g (51.2 oz)
Environment
Operating temperature ......................................0 °C to 55 °C
Storage temperature ..........................................-20 °C to 70 °C
Relative humidity..............................................5% to 85%, noncondensing
Pollution Degree ...............................................2
Maximum altitude.............................................2,000 m
Indoor use only.
Accessories
Visit
ni.com
for information about the following accessory.
Caution
This product must be operated with shielded accessories to ensure
compliance with Electromagnetic Compatibility (EMC) requirements. Do not
use unshielded terminal blocks (such as the NI TBX-50B) or other unshielded
accessories unless they are installed in a shielded enclosure with properly designed
and shielded input/output ports and connected to the NI product(s) using a shielded
cable. If unshielded cables or accessories are not properly installed and shielded, the
EMC specifications for the product are no longer guaranteed.
Table 14.
NI Accessory for the 160-Pin DIN Cable
Accessory
Part Number
NI TBX-50B terminal block, with screw connection and
50 position D-Subminiature pin strip
782866-01
