manualshive.com logo in svg
background image

SCXI  Quick Start Guide

Signal Conditioning eXtensions for Instrumentation

This document contains English, French, and German language instructions. For Japanese, Korean, 
and Simplified Chinese language instructions, refer to the other document in your kit.

Ce document contient des instructions en anglais, français et allemand. Pour les consulter en japonais, 
coréen et chinois simplifié, reportez-vous à l’autre document dans votre kit.

Dieses Dokument enthält Anleitungen auf Englisch, Französisch und Deutsch. Anleitungen auf 
Japanisch, Koreanisch und in vereinfachtem Chinesisch finden Sie in dem anderen Dokument in 
diesem Kit.

This document explains how to install and configure SCXI signal conditioning modules in SCXI-1000, 
SCXI-1001, SCXI-1000DC, or PXI/SCXI combination chassis, confirm the module and chassis are 
operating properly, and set up multichassis systems. It also describes the NI-DAQmx software relative 
to SCXI and integrated signal conditioning products. This document assumes you have already installed, 
configured, and tested your NI application and driver software, and the data acquisition (DAQ) device 
to which you will connect the SCXI module. If you have not, refer to the 

DAQ Getting Started 

guides 

included with the DAQ device and available on the NI-DAQ software media and from 

ni.com/

manuals

, before continuing. 

For instructions on configuring Traditional NI-DAQ (Legacy), refer to the 

Traditional NI-DAQ (Legacy) 

Readme

 after you have installed the software. Refer to the 

NI Switches Getting Started Guide

, available 

at 

ni.com/manuals

, for switch information.

Step 1. Unpack the Chassis, Module, and Accessories

Remove the chassis, module, and accessory from the packaging and inspect the products for loose 
components or any sign of damage. Notify NI if the products appear damaged in any way. Do 

not

 install 

a damaged device.

For safety and compliance information, refer to the device documentation packaged with your device, 
at 

ni.com/manuals

, or the NI-DAQmx media that contains device documentation.

Содержание SCXI Series





























































Отзывы: