![background image](http://html1.mh-extra.com/html/national-instruments/scxi-1175/scxi-1175_getting-started-manual_3485850003.webp)
Electromagnetic Compatibility Guidelines
This product was tested and complies with the regulatory requirements and limits for
electromagnetic compatibility (EMC) stated in the product specifications. These requirements
and limits are designed to provide reasonable protection against harmful interference when the
product is operated in the intended operational electromagnetic environment.
This product is intended for use in industrial locations. However, harmful interference may
occur in some installations, when the product is connected to a peripheral device or test object,
or if the product is used in residential or commercial areas. To minimize interference with
radio and television reception and prevent unacceptable performance degradation, install and
use this product in strict accordance with the instructions in the product documentation.
Furthermore, any modifications to the product not expressly approved by National Instruments
could void your authority to operate it under your local regulatory rules.
Caution
To ensure the specified EMC performance, operate this product only with
shielded cables and accessories.
Caution
To ensure the specified EMC performance, the length of all I/O cables
must be no longer than 3 m (10 ft).
Verifying the System Requirements
To use the NI-SWITCH instrument driver, your system must meet certain requirements.
For more information about minimum system requirements, recommended system, and
supported application development environments (ADEs), refer to the product readme,
which is available on the driver software DVD or online at
.
Verifying the Kit Contents
•
SCXI switch module
•
NI -SWITCH driver software DVD
•
NI Switches Getting Started Guide
for your NI SCXI switch module (this document)
•
Specifications document for you NI SCXI switch module
•
Read Me First: Safety and Electromagnetic Compatibility
NI SCXI Required Items
In addition to the items contained in the kit, you need the following items to install or operate
your device.
•
NI SCXI chassis or NI PXI/SCXI combination chassis
•
Switch controller
2 |
NI Switches Getting Started Guide
| ni.com
Содержание SCXI-1175
Страница 1: ...SCXI 1175 ...