©
National Instruments Corporation
3-1
3
Signal Connections
This chapter describes the input and output signal connections to the
SCXI-1112 module via the module front and rear signal connectors. This
chapter also includes connection instructions for the signals on the
SCXI-1112 module connectors.
Caution
Static electricity is a major cause of component failure. To prevent damage to the
electrical components in the module, take antistatic precautions whenever removing a
module from the chassis or whenever handling a module.
Front Connector
Figure 3-1 shows the thermocouple input assignments for the SCXI-1112
module front connector.