Chapter 6
SC-2054
©
National Instruments Corporation
6-3
Connect your SC-2054 to the signal conditioning accessories via a type
NB7, 26-pin ribbon cable. This cable connects the SC-2054 to any of the
SC-206
X
Series boards. An 8-channel SSR Series backplane with a
26-conductor ribbon cable is available for connection to the SC-2054.
A 50-pin cable is also available to connect the SC-2054 to a 16-channel or
24-channel SSR Series backplane. For instructions on making these
connections to the proper signal conditioning accessories, refer to
in Chapter 10,
.
Connectors
The SC-2054 has four 50-pin ribbon cable connectors. The first two are
connected pin-by-pin to each other. You can use either of the first two
connectors to attach the SC-2054 to the DAQ device via a type NB5 or
R1005050 cable. You can daisy-chain the second connector to 48-channel
digital I/O signals and other 50-pin accessories. Each of the other two
50-pin connectors has 24-channel digital I/O signals in a DIO-24-style
connector.
The SC-2054 also has six 26-pin ribbon cable connectors that you can use
to connect to the signal conditioning accessories. The digital ports are
compatible with the SC-206
X
Series digital signal conditioners as well as
with the 8-channel SSR Series solid-state relay board.
Figure 6-2 illustrates the connections between the SC-2054 and the
necessary accessories and devices.
Note
A single SC-2054 adapter has signal-conditioning compatible pin connections for
only half of the signals on a 96-channel DAQ device. Two SC-2054 adapters with
a type NB5 or R1005050 cable have signal-conditioning compatible pin
connections for all 96 signals on the DAQ device.