About This Manual
©
National Instruments Corporation
xiii
SC-205
X
Refers to the SC-2050, SC-2051, SC-2052, SC-2053, SC-2054, SC-2055,
SC-2056, and SC-2057 adapters.
National Instruments Documentation
is one piece of the documentation set for
your data acquisition or SCXI system. You could have any of several types
of documents, depending on the hardware and software in your system. Use
the documents you have as follows:
•
Getting Started with SCXI
—If you are using SCXI, this is the first
manual you should read. It gives an overview of the SCXI system and
contains the most commonly needed information for the modules,
chassis, and software.
•
Your SCXI hardware user manuals—If you are using SCXI, read these
manuals next for detailed information about signal connections and
module configuration. They also explain in greater detail how the
module works and contain application hints.
•
Your DAQ hardware manuals—These manuals have detailed
information about the DAQ hardware that plugs into or is connected to
your computer. Use these manuals for hardware installation and
configuration instructions, specification information about your DAQ
hardware, and application hints.
•
Software documentation—Examples of software documentation you
may have are the LabVIEW and LabWindows/CVI documentation sets
and the NI-DAQ documentation. After you set up your hardware
system, use either the application software (LabVIEW or
LabWindows/CVI) or the NI-DAQ documentation to help you write
your application. If you have a large, complicated system, it is
worthwhile to look through the software documentation before you
configure your hardware.
•
Accessory installation guides or manuals—If you are using accessory
products, read the terminal block and cable assembly installation
guides or accessory board user manuals. They explain how to
physically connect the relevant pieces of the system. Consult these
guides when you are making your connections.
•
SCXI Chassis User Manual
—If you are using SCXI, read this manual
for maintenance information on the chassis and for installation
instructions.