National Instruments RMC-8356, Руководство пользователя

Страница: 39 / 113

© National Instruments | 2-23
RMC-8356 User Manual
Terminal Type
Use this feature to select the target terminal emulation type for Console Redirection. Select
VT100 to use the ASCII character set. Select VT100+ to add color and function key support.
Select ANSI to use the extended ASCII character set. Select VT-UTF8 to use UTF8 encoding to
map Unicode characters into one or more bytes. The options are
VT100 , VT100+ ,
VT-UTF8 , and ANSI .
Bits Per Second
This item sets the transmission speed for a serial port used in Console Redirection. Make
sure that the same speed is used in the host computer and the client computer. A lower
transmission speed may be required for long and busy lines. The options are
9600 , 19200 ,
57600 , and 115200 (bits per second).
Flow Control
Use this item to set the flow control for Console Redirection to prevent data loss caused by
buffer overflow. Send a Stop signal to stop sending data when the receiving buffer is full.
Send a Start signal to start sending data when the receiving buffer is empty. The options are
None, Hardware RTS/CTS , and Software Xon/Xoff .
• Data Bits
• Parity
• Stop Bits
ACPI Settings
ACPI Sleep State
This feature selects the ACPI Sleep State that the system will enter into when the suspend
button is activated. The options are
Suspend Disabled and S3 (Suspend to RAM) .
High Precision Event Timer
Select Enabled to activate the High Performance Event Timer (HPET) that produces periodic
interrupts at a much higher frequency than a Real-time Clock (RTC) does in synchronizing
multimedia streams, providing smooth playback and reducing the dependency on other
timestamp calculation devices, such as an x86 RDTSC Instruction embedded in the CPU.
The High Performance Event Timer is used to replace the 8254 Programmable Interval Timer.
The options are
Disabled and Enabled .
WHEA Support
Select Enabled to support the Windows Hardware Error Architecture (WHEA) platform and
provide a common infrastructure for the system to handle hardware errors within the Windows
OS environment to reduce system crashes and to enhance system recovery and health
monitoring. The options are
Enabled and Disabled .