2-20
|
ni.com
Chapter 2
Installation and BIOS Setup
COM1 Flow Control
Use this feature to set the flow control for Console Redirection to prevent data loss caused by
buffer overflow. Send a Stop signal to stop sending data when the receiving buffer is full. Send
a Start signal to start sending data when the receiving buffer is empty. The options are
None
and
Hardware RTS/CTS
.
COM1 VT-UTF8 Combo Key Support
Select Enabled to enable VT-UTF8 Combination Key support for ANSI/VT100 terminals. The
options are
Disabled
and
Enabled.
COM1 Recorder Mode
Select Enabled to capture the data displayed on a terminal and send it as text messages to a
remote server. The options are
Disabled
and
Enabled
.
COM1 Resolution 100x31
Select Enabled for extended-terminal resolution support. The options are
Disabled
and
Enabled
.
COM1 Legacy OS Redirection Resolution
Use this feature to select the number of rows and columns used in Console Redirection for
legacy OS support. The options are
80x24
and
80x25
.
COM1 Putty KeyPad
This feature selects the settings for Function Keys and KeyPad used for Putty, which is a
terminal emulator designed for the Windows OS. The options are
VT100
,
LINUX
,
XTERMR6
,
SC0
,
ESCN
, and
VT400
.
COM1 Redirection After BIOS Post
Use this feature to enable or disable legacy console redirection after BIOS POST. When set to
Bootloader, legacy console redirection is disabled before booting the OS. When set to Always
Enable, legacy console redirection remains enabled when booting the OS. The options are
Always Enable
and
Bootloader
.
SOL/COM2 Console Redirection
Select Enabled to use the SOL port for Console Redirection. The options are
Enabled
and
Disabled
.