SCC-RLY01 Relay Module User Guide
2
ni.com
bold
Bold text denotes items that you must select or click in the software, such
as menu items and dialog box options. Bold text also denotes parameter
names.
italic
Italic text denotes variables, emphasis, a cross reference, or an introduction
to a key concept. This font also denotes text that is a placeholder for a word
or value that you must supply.
monospace
Text in this font denotes text or characters that you should enter from the
keyboard, sections of code, programming examples, and syntax examples.
This font is also used for the proper names of disk drives, paths, directories,
programs, subprograms, subroutines, device names, functions, operations,
variables, filenames, and extensions.
SC-2345
SC-2345 refers to both the SC-2345 connector block and SC-2345 with
configurable connectors.
SCC
SCC refers to any SCC Series signal-conditioning module.
What You Need to Get Started
To set up and use the SCC-RLY01, you need the following items:
❑
SC-2345/2350 with one of the following:
–
SCC-PWR01
–
SCC-PWR02 and the PS01 power supply
–
SCC-PWR03 (requires a 7 to 42 VDC power supply, not included)
❑
One or more SCC-RLY01 modules
❑
SC-2345/2350 User Manual
, available at
ni.com
❑
SCC-RLY01 Relay Module User Guide
❑
SCC Quick Start Guide
, available at
ni.com
❑
Read Me First: Safety and Radio-Frequency Interference
❑
SC-2345 Quick Reference Label
❑
68-pin E Series DAQ device, documentation, and 68-pin cable
❑
1/8 in. flathead screwdriver
❑
Numbers 1 and 2 Phillips screwdrivers