Users Guide
QuickSyn Lite Frequency Synthesizer
35 of 40
ni-microwavecomponents.com
The Edit List dialog box, shown in Figure 40, is accessible by
selecting the Create/Edit List button on the List Mode panel.
Point Number, Frequency, Dwell Time
These entry boxes
enable the user to specify point number, frequency, and dwell time
values for creating sweep lists. To specify a value in these entry
boxes, highlight the number in the box of the parameter you wish
to set and enter a new value or use the up/down arrows on the left
side of the entry box.
Output ON/OFF
The Output ON/OFF buttons located next to
the Dwell Time entry boxes in the Edit List dialog box are used to
control the RF output signal at the specified point. When selected
the indicator on the button will illuminate and RF output will be
enabled.
Clear Current List
This button is used to clear data in all entry
boxes in the Edit List dialog box.
Figure 40
Edit List Dialog Box
Step 5-5 Review the Edit List Dialog Box