SPA V1.0 ASSEMBLY
Before starting this kit, prepare the following tools: Soldering iron (1520W will do),
multimeter, protective eyewear, flush cutters, n2. hex screwdriver or allen key, phillips
screwdriver and some coffee. Also briefly go through this guide and make sure that you
understand all the steps, if you are having any troubles don’t hesitate to seek help at the
forum.
We suggest that you work in a clean and a well lit environment to avoid accidents or losing
any of the small components.
IMPORTANT!
If you have never soldered before, check out this great
DOWNLOADS
● schematics and board diagram –
● And the Bill of Materials (BOM) –
● user manual –
And please check that your boards are the same version as this guide and that your kit
contains the following items:
