Installation and Configuration
This section explains how to unpack, install, and configure the PXIe-8267 hardware and
software.
What You Need to Get Started
The PXIe-8267 kit contains the following items:
•
PXIe-8267 module
•
PXIe-8267 documentation
Note
The device kit does not include driver media. Refer to the
Software/Driver
Installation
section for information about installing the drivers.
Unpacking
Note
To prevent electrostatic discharge (ESD) from damaging the device, ground
yourself using a grounding strap or by holding a grounded object, such as your
computer chassis.
1.
Carefully inspect the shipping container and the PXIe-8267 for damage.
2.
Check for visible damage to the metal work.
Note
Never touch the exposed pins of connectors.
Note
Do not install a device if it appears damaged in any way.
3.
Check to make sure all hardware is undamaged.
If damage appears to have been caused during shipment, file a claim with the carrier.
Retain the packing material for possible inspection and/or reshipment.
4.
Unpack any other items and documentation from the kit.
Hardware Installation
Note
Before you begin, install and configure your chassis and controller.
Caution
To protect both yourself and the chassis from electrical hazards, leave the
chassis off until you finish installing the PXIe-8267.
Attention
Pour vous protéger, et protéger le châssis, contre les risques électriques,
laissez le châssis éteint tant que vous n'avez pas terminé l'installation du PXIe-8267.
1.
Power off your PXI Express chassis, but leave it plugged in while installing the
PXIe-8267. The power cord grounds the chassis and protects it from electrical damage
while you install the module.
2
|
ni.com
|
PXIe-8267 Getting Started Guide
