Note
All front panel mounting screws must be attached to the PXI
Express chassis to ensure all backplane connectors are fully mated.
Tightening the mounting screws also increases mechanical stability
and electrically connects the front panel to the chassis, which can
improve the signal quality and electromagnetic performance.
9. Repeat steps
through
for each PXI module within your instrument until you
have installed all PXI modules for your instrument.
10. Cover all empty slots using slot blockers and EMC filler panels.
Note
For more information about installing slot blockers and filler
panels, go to
.
11. Power on the chassis.
The in-chassis modules of your PXIe-5842 instrument are now correctly installed in
your PXI chassis.
PXIe-5842 instruments also require interconnections between the installed
modules. Continue with the interconnection procedure for your instrument
according to the interconnection guidelines.
Ensuring Signal Quality when Interconnecting the
PXIe-5842
After
you install the PXIe-5842 modules into your chassis, you must use the included
cables to interconnect the PXI Express modules to each other and subsequently to
any modules external to the PXI Express chassis. To ensure proper connections that
maintain signal quality, adhere to the following guidelines while interconnecting the
modules.
■
Inspect all RF connectors before attaching mating cables. Clean with
dry compressed air, if necessary, to remove any contaminants that may be
present.
ni.com
12
PXIe-5842
Getting Started
Содержание PXIe-5842
Страница 1: ...PXIe 5842...
Страница 2: ...PXIe 5842 Getting Started 2023 03 29...
Страница 16: ...Figure 2 Interconnected PXIe 5842 VST 1 PXIe 5842 2 PXIe 5655 National Instruments 15 PXIe 5842 Getting Started...
Страница 33: ...Configuring the PXIe 5842 in MAX ni com 32 PXIe 5842 Getting Started...