National Instruments PXIe-5841 Скачать руководство пользователя

Страница: 1 / 20

GETTING STARTED GUIDE

PXIe-5841

6 GHz, 1 GHz Bandwidth, RF PXI Vector Signal Transceiver

Note

Before you begin, install and configure your chassis and controller.

This document explains how to install, configure, and test the PXIe-5841. The PXIe-5841 is
an RF vector signal transceiver (VST) and ships with the following software options, which
you use to program the device.
•

RFmx software

•

NI-RFSA and NI-RFSG driver software

Notice

The protection provided by this equipment may be impaired if it is used in

a manner not described in the documentation.

Contents

Other Equipment............................................................................................................... 4

Choosing and Installing the Software....................................................................................... 5

Software Options...............................................................................................................5
Installing the Software...................................................................................................... 5

Installing the PXIe-5841........................................................................................................... 6

Direct Connections to the PXIe-5841............................................................................... 8
Hardware Front Panel Connectors and Indicators............................................................ 9

Configuring the Hardware in MAX........................................................................................ 11
Self-Calibration.......................................................................................................................12

Performing a Device Self-Calibration Using the NI-RFSA or NI-RFSG SFP............... 12

Locating the Software and Examples......................................................................................13

Software Locations......................................................................................................... 13
Programming Examples Locations................................................................................. 15

Making a First Measurement.................................................................................................. 16
Troubleshooting...................................................................................................................... 17

What Should I Do if the PXIe-5841 Doesn't Appear in MAX?......................................17
Why Is the ACCESS LED Off When the Chassis Is On?...............................................17

Where to Go Next................................................................................................................... 18
Worldwide Support and Services............................................................................................ 18

Содержание PXIe-5841





















Результаты поиска

Содержание PXIe-5841

Отзывы:

Похожие инструкции для PXIe-5841

Бренды по названию

Популярные бренды

National Instruments PXIe-5841, Руководство по началу работы

Результаты поиска

Содержание PXIe-5841

Отзывы:

Похожие инструкции для PXIe-5841

Бренды по названию

Популярные бренды